The GR-1 is a precision time code generator/reader designed for production sound recording. The GR-1 can be used as a stand-alone master time code source in most recording environments. Low power consumption with back lighting assures users of long battery life in a small reliable package. Speed checking, memory hold and print are powerful features that will help sound mixers on the set.
Generates 23.976 fps for use with High Definition Cameras!
|READ – Reads SMPTE/EBU time code at normal operating speeds.||GX – Generates time code locked to an external field or frame reference.|
|DISPLAY – Displays time code/user bits and mode on a low power LCD backlit display.||GU – Inserts externally read time code into the user bits of the current time code. This is useful for music playback with live action recording.|
|RATE – Displays the incoming time code speed, mode and drop frame status.||CLOCK – An internal time of day clock updates the code on every power up.|
|HOLD – Saves hold points in memory. Previous time code/user bit points are shown along with their memory location.||JAM – Jam syncs to external code and can cross jam different code rates. Any break in code will jam to a new value (continuous jam).|
|GEN – Generates time code at 23.976, 24, 25, 29.97, 30 fps drop and non drop. User bits can be left free or set as date in the month/day or day/month format.||CHECK – Displays a comparison of the internal time code to external time code. An =, ¹, + or – sign in the jam, generate and start/stop modes show offset and drift.|
|REMOTE – Printer out, hold start/stop and TC in/out are accessible in the 9 pin “D” connector.||PRINT – A serial printer can be connected to make time code logs, read breaks in input code and print stored memory points.|
|SS – Generates time code in the start/stop mode. The code is normally stopped until pin #2 of the remote connector is pulled low. The hold memory is updated with every code start point.||LB – Indicates low battery before the power is exhausted. Also displays status of the internal memory battery.|
|SIZE & WEIGHT: 5.9″ x 4.25″ x 1.55″, 1.3 lbs.||OUTPUT: 2 volts into 1k load impedance|
|PRINTER: Serial out 1200 baud 8 bits 5 volt with DTR.||STABILITY: High stability TCXO crystal. +/- 1ppm -30 to +75°C|
|INPUT: Reads code down to -18db with 51k input impedance||POWER: 6 to 24v DC at 15ma (backlight off) 25ma (backlight on). 6 AA internal battery supply. Battery life approximately 70 hours. 1 BR2325 3v memory backup. Battery life approximately 1 year.|