The Dcode Syncbox Time Code Generator is designed to work with the Dcode Time Code Slate allowing complete freedom from cables. It is great for concerts where transmitted time code is not feasible. The Syncbox generates all common time code formats. It can be jam set from an external time code source or internally set and used as a stand-alone generator.
Generates 23.976 fps for High Definition Cameras!
NOTE: SB-2(A) is no longer available due to obsolete chips on the motherboard. Spare and replacement parts for the SB-2(A) will continue to be available, but new units are no longer in production.
|Generates time code at: 23.976, 24, 25, 29.97 and 30 fps 29.97, 30 drop frame.||PRINTER I/O for logging with take numbers or for a computer serial interface|
|Generates Sync Pulse at: 50, 59.94, and 60 Hz squarewave; optional 48 Hz squarewave.||EXTERNAL REMOTE POWER and TC Loop through|
|TIME CODE SET: Minutes can be set only in the local mode. Pushing the button increments the minutes. Holding the button increments the minutes at a fast rate, useful for setting UB hours. Minute set is inhibited after 10 minutes.||TIME CODE IN: The generator is jam set at power on. Both time code and user bits are set from the external source. In Jam mode the LED strobes once per second on the second at turn on.|
TIME CODE OUT: The local mode starts code at (00:58:30:00) allowing time to set hours before the rollover to the next hour.
User bits displayed in the local mode are (00:00:00:XX) where XX indicates the internal frame rate setting.
Example: (00:00:00:30) shows the generator is running at 30fps.
The user bit hour position automatically increments on the 24th hour.
Example: (01:00:00:30) shows on rollover.
The internal LED strobes at the selected frame rate for 10 minutes after turn on. The LED strobes once per second after that to conserve battery life.
|SIZE & WEIGHT:
4.7″ x 2.4″ x 1.0″
4.7 oz. (no battery)
|OUTPUT: 1 volt peak into a 10K OHM load.|
|BATTERY LIFE: Approximately 60 hours with an alkaline battery (Duracell MN1604). No damage with reverse battery.||POWER: 9 volts at 7ma. Internal battery or external power into jam input.|
Reads down to 0.3 volts (-10dB)
10K OHM DC Load impedance.